Iron Based Alloy Powder
stainless steel powder
Iron Based Alloy Powder Pictures:
Contact to get free solution!
Metal Powders Produced by Gas Atomizing | |||||
Iron Based Alloy Powder | |||||
| Alloy grades | Chemistry | Particle Size | ASTM | AMS | |
| 18Ni300 (FeNiCoMo) | C 0.03 max | Co 8.5-10.0 | 0-45μm 0-53μm 15-45μm 15-53μm 45-106μm | – | – |
| Mn 0.15 max | Ti 0.6-1.2 | ||||
| Si 0.10 max | Cr 0.5 max | ||||
| P 0.01 max | Mo 4.5 -5.2 | ||||
| S 0.01max | Fe Bal. | ||||
| Ni 17.0 -19.0 | |||||
| 17-4PH | C 0.07max | Ni 3.0-5.0 | 0-25μm 0-45μm 0-53μm 15-45μm 15-53μm 45-106μm | A564 | – |
| Si 1.0 max | Cr 15.0-17.5 | ||||
| Mn 1.0 max | Cu 3.0-5.0 | ||||
| P 0.040 max | Nb 0.15-0.45 | ||||
| S 0.030 max | Fe Bal. | ||||
| M2 | C 0.8-0.9 | Cr 3.8-4.4 | 0-45μm 0-53μm 15-45μm 15-53μm 45-106μm | – | – |
| Mn 0.20-0.45 | V 1.75-2.20 | ||||
| P 0.03 max | W 5.50-6.75 | ||||
| S 0.03 max | Mo 4.50-5.50 | ||||
| Si 0.15-0.40 | Fe Bal | ||||
| SUS 316L | C 0.03 max | Si 1.0 max | 0-25μm 0-45μm 0-53μm 15-45μm 15-53μm 45-106μm | A312 | – |
| Mn 2.0 max | Mo 2.0-3.0 | ||||
| S 0.030 max | Cr 16.0-18.0 | ||||
| P 0.045 max | Fe Bal | ||||
| Ni 10.0-14.0 | |||||
CX Die Steel Powder | Ni 8.5-10.0 | Al 1.2-2.0 | 0-25μm 15-45μm 15-53μm | – | – |
| Cr 11.0-13.0 | O 0.03max | ||||
| Mo 1.1-1.6 | Fe Bal. | ||||
| Mn 0.4max | |||||
| SUS 304L | C 0.03 max | Si 1.0 max | 0-45μm 0-53μm 15-45μm 15-53μm 45-106μm | A312 | – |
| Mn 2.0 max | Mo 2.0-3.0 | ||||
| S 0.030 max | Cr 18.0-20.0 | ||||
| P 0.045 max | Fe Bal | ||||
| Ni 8.0-11.0 | |||||
| Invar 36 (4J36) | C 0.05max | Mg 0.1max | 0-45μm 0-53μm 15-45μm 15-53μm 45-106μm | – | – |
| Si 0.4max | Ti 0.1max | ||||
| Mn 0.6max | Zr 0.1max | ||||
| Ni 35.0-37.0 | P 0.015max | ||||
| Cr 0.25max | S 0.015max | ||||
| Co 0.5max | Fe Bal | ||||
| Al 0.1max | |||||
| 12Cr9Ni | Fe Bal | Cr 11.0-13.0 | 0-45μm 0-53μm 15-45μm 15-53μm 45-106μm | – | – |
| Ni 8.4-10.0 | Si 0.1-0.3 | ||||
| Mo 1.1-1.7 | Al 1.2-1.8 | ||||
| Mn 0.1-0.3 | |||||
| H13 | Fe Bal | Si 0.8-1.2 | 0-45μm 0-53μm 15-45μm 15-53μm 45-106μm | A681-08 | – |
| Mo 1.1-1.6 | C 0.33-0.43 | ||||
| Mn 0.2-0.5 | V 0.3-0.6 | ||||
| Cr 4.75-5.50 | |||||
| QT450-10 | Fe Bal | Mn 1.0max | 15-53μm 53-106μm 53-150μm | – | – |
| C 3.5-4.5 | S 0.1max | ||||
| Mg 0.6max | Others 1.0max | ||||
| Si 2.0-3.0 | |||||
| FeCr16Ni8 (HRC 29-34) | Fe Bal | B 1.0-1.3 | 50-106μm 50-150μm | – | – |
| Mn 0.4-0.8 | Cr 14.5-16.5 | ||||
| Ni 7.5-8.2 | C 0.3max | ||||
| Si 0.6-0.9 | Others 0.2max | ||||
| FeCr12Ni (HRC 59-64) | Fe Bal | B 1.3-1.7 | 50-106μm 50-150μm | – | – |
| Mn 0.4-0.8 | Cr 10.0-13.0 | ||||
| Ni 1.0-1.5 | C 0.3max | ||||
| Si 0.8-1.2 | Others 0.2max | ||||
| SS420 | Fe Bal | W 0.3max | 45-106μm | – | – |
| C 0.12max | B 0.4-0.6 | ||||
| Si 0.8-1.0 | S 0.03max | ||||
| Ni 2.0-3.0 | P 0.04max | ||||
| Cr 16.0-19.0 | Mn 0.25max | ||||
| D2 | Fe Bal | Si 0.10-0.60 | 53-106μm 53-150μm | A681-08 | – |
| C 1.40-1.60 | Cr 11.0-13.0 | ||||
| Mn 0.10-0.60 | V 0.50-1.10 | ||||
| P 0.03max | Mo 0.70-1.20 | ||||
| S 0.03max | |||||
| Duplex 2205 (UNS S31803) | Fe Bal | Si 1.0max | 15-53μm 53-106μm 53-150μm | A815 | – |
| C 0.03max | Ni 4.5-6.5 | ||||
| Mn 2.0max | Cr 21.0-23.0 | ||||
| P 0.03max | Mo 2.5-3.5 | ||||
| S 0.02max | N 0.08-0.20 | ||||
| GDHR-2 | Fe Bal | Si 1.0max | 15-53μm 53-106μm 53-150μm | A815 | – |
| C 0.04max | Ni 5.5-8.0 | ||||
| Mn 8.0-10.0 | Cr 19.0-21.5 | ||||
| P 0.025max | N 0.20-0.34 | ||||
| S 0.015max | |||||
| Kovar (4J29) | Fe Bal | Si 1.0max | 15-53μm 53-106μm 53-150μm | A815 | – |
| C 0.04max | Ni 5.5-8.0 | ||||
| Mn 8.0-10.0 | Cr 19.0-21.5 | ||||
| P 0.025max | N 0.20-0.34 | ||||
| S 0.015max | |||||
| Fe45 (HRC 43-47) | Fe Bal | W 0.3max | 50-106μm 50-150μm | – | – |
| C 0.12max | B 0.4-0.6 | ||||
| Si 0.8-1.0 | S 0.03max | ||||
| Ni 2.0-3.0 | P 0.04max | ||||
| Cr 16.0-19.0 | Mn 0.25max | ||||
| Fe3035 (HRC 32-35) | Fe Bal | Mo 0.6-0.8 | 50-106μm 50-150μm | – | – |
| C 0.08max | B 0.4-0.6 | ||||
| Mn 1.1-1.3 | S 0.03max | ||||
| Si 1.4-1.6 | P 0.04max | ||||
| Cr 16.0-19.0 | Ni 8.0-10.0 | ||||
| Soft magnetic powder | FeNi50 | 0-100μm (D50=30-40μm) | – | – | |
| FeSi6.5 | 0-100μm (D50=25-35μm) | ||||
| FeSiAl | 0-125μm (D50=30-55μm) | ||||
| FeNiMo | 0-75μm (D50=15-35μm) | ||||
| FeSiCr | 0-45μm (D50=14-20μm) | ||||
| Customized: 15-5PH，SUS304, SUS306，AISI904, Osprey 1.4091, 430, 310S, etc | |||||
Applications
3D Printing
Mechanical Industry
Metallurgical Industry
Medical Industry
about us
Truer Industry
Shanghai Truer Industrial Development Co., Ltd. was established in 2009 and created the additive manufacturing business in 2019, which is dedicated to building integrating 3D printing powder making equipment and services, high quality 3D printing powders to help engineering applications of additive manufacturing.
The company not only provides professional selective electron beam melting (SEBM) technology and equipment, but also plasma rotating electrode process powder making (PREP) technology and equipment. We also have various grades of spherical metal powders, including TiNi, TiTa, TiAl, TiNbZr, CoCrMo and so on.
Send Us A Message
Contact us
sales
Cassiel Ding
+86 – 13611869448
[email protected]
Sales Manager
Lucy Wen
+86 – 15250232891
[email protected]
Quality Control
Mike Wu
+86 – 13862291355
[email protected]
sales
Joan Zhou
+86 – 17316565943
[email protected]
Customer Service
Luke Zhang
+86 – 15250014048
[email protected]