Aluminum Based Alloy Powder
Shanghai Truer Industrial Development Co., Ltd
Aluminum Based Alloy Powder Pictures：
Contact to get free solution!
Metal Powders Produced by Gas Atomizing | |||||
Aluminum Based Alloy Powder | |||||
| Alloy grades | Chemistry | Particle Size | ASTM | AMS | |
| Pure Al | Al 99.8Min. | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | – | – | |
| AlSi7Mg (F357) | Al Bal. | Mn 0.35max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | B26 | 4289 |
| Si 6.5-7.5 | Mg 0.20-0.45 | ||||
| Fe 0.6max | Zn 0.35max | ||||
| Ti 0.25max | Other 0.15max | ||||
| Cu 0.25max | |||||
| AlSi10Mg | Al Bal. | Pb 0.05max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | – | – |
| Si 9.0-11.0 | Mg 0.20-0.45 | ||||
| Mn 0.45max | Cu 0.10max | ||||
| Ni 0.05max | Ti 0.15max | ||||
| Zn 0.10max | Fe 0.55max | ||||
| Sn 0.05max | |||||
| AlSi12 (4047) | Al Bal. | Mn 0.15max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Si 11.0-13.0 | Mg 0.10max | ||||
| Fe 0.8max | Zn 0.20max | ||||
| Cu 0.30 max | Others 0.15max | ||||
| Al 2024 | Si 0.5max | Cr 0.1max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Fe 0.5max | Zn 0.25max | ||||
| Cu 3.8-4.9 | Ti 0.15max | ||||
| Mn 0.3-0.9 | Al Bal. | ||||
| Mg 1.2-1.8 | Others 0.15max | ||||
| Al 6061 | Fe 0.70max | Mg 0.8-1.2 max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Cr 0.04-0.35 | Ti 0.15max | ||||
| Si 0.40-0.80 | Zn 0.25 max | ||||
| Cu 0.15-0.40 | Others 0.15 max | ||||
| Mn 0.15max | Al Bal. | ||||
| Al 6063 | Si 0.2-0.6 | Cr 0.10max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Fe 0.35max | Ti 0.10max | ||||
| Cu 0.10max | Zn 0.10max | ||||
| Mn 0.10max | Others 0.15 max | ||||
| Mg 0.45-0.90 | Al Bal. | ||||
| Al 7075 | Si 0.40max | Cr 0.18-0.28 | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Fe 0.5max | Zn 5.1-6.1 | ||||
| Cu 1.2-2.0 | Ti 0.20max | ||||
| Mn 0.30max | Others 0.15max | ||||
| Mg 2.1-2.9 | Al Bal. | ||||
| Al 3003 | Si 0.6max | Zn 0.10max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Fe 0.7max | Others 0.15max | ||||
| Cu 0.05-0.20 | Al Bal. | ||||
| Mn 1.0-1.5 | |||||
| Al 3103 | Si 0.50max | Cr 0.10max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Fe 0.7max | Zn 0.20max | ||||
| Cu 0.10max | Others 0.15max | ||||
| Mn 0.9-1.5 | Al Bal. | ||||
| Mg 0.30max | |||||
| Al 3203 | Si 0.60max | Zn 0.10 max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Fe 0.70max | Others 0.15max | ||||
| Cu 0.05max | Al Bal. | ||||
| Mn 1.0-1.5 | |||||
| Al 3004 | Si 0.30max | Zn 0.25max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Fe 0.70max | Cu 0.25max | ||||
| Mn 1.0-1.5 | Others 0.15max | ||||
| Mg 0.8-1.3 | Al Bal. | ||||
| Al 3104 | Si 0.60max | Zn 0.25max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Fe 0.80max | Ti 0.10max | ||||
| Cu 0.05-0.25 | V 0.05max | ||||
| Ga 0.05max | Others 0.15max | ||||
| Mn 0.8-1.4 | Al Bal. | ||||
| Mg 0.8-1.3 | |||||
| Al 3204 | Si 0.30max | Mg 0.8-1.5 | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Fe 0.70max | Zn 0.25max | ||||
| Cu 0.10-0.25 | Others 0.15max | ||||
| Mn 0.8-1.5 | Al Bal. | ||||
| Al 3005 | Si 0.60max | Cr 0.10max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Fe 0.70max | Zn 0.25max | ||||
| Cu 0.30max | Ti 0.10max | ||||
| Mn 1.0-1.5 | Others 0.15max | ||||
| Mg 0.2-0.6 | Al Bal. | ||||
| Al 3105 | Si 0.6max | Cr 0.20max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Fe 0.7max | Zn 0.40max | ||||
| Cu 0.30max | Ti 0.10max | ||||
| Mn 0.30-0.80 | Others 0.15max | ||||
| Mg 0.20-0.80 | Al Bal. | ||||
| Al 3007 | Si 0.50max | Cr 0.20max | 0-45μm 15-45μm 15-53μm 45-106μm 53-106μm 53-150μm | ISO 209 | – |
| Fe 0.70max | Zn 0.40max | ||||
| Cu 0.05-0.30 | Ti 0.10max | ||||
| Mn 0.30-0.80 | Others 0.15max | ||||
| Mg 0.60max | Al Bal. | ||||
| Customized: 1XXX, 2XXX, 3XXX, 4XXX, 5XXX,6XXX,7XXX, AlSi(12-40%), AlMnScZr, AlMgScZr, etc | |||||
Applications
3D Printing
Mechanical Industry
Metallurgical Industry
Medical Industry
about us
Truer Industry
Shanghai Truer Industrial Development Co., Ltd. was established in 2009 and created the additive manufacturing business in 2019, which is dedicated to building integrating 3D printing powder making equipment and services, high quality 3D printing powders to help engineering applications of additive manufacturing.
The company not only provides professional selective electron beam melting (SEBM) technology and equipment, but also plasma rotating electrode process powder making (PREP) technology and equipment. We also have various grades of spherical metal powders, including TiNi, TiTa, TiAl, TiNbZr, CoCrMo and so on.
Send Us A Message
Contact us
sales
Cassiel Ding
+86 – 13611869448
[email protected]
Sales Manager
Lucy Wen
+86 – 15250232891
[email protected]
Quality Control
Mike Wu
+86 – 13862291355
[email protected]
sales
Joan Zhou
+86 – 17316565943
[email protected]
Customer Service
Luke Zhang
+86 – 15250014048
[email protected]
English 
Spanish 
Portuguese 
Arabic