inconel 625 powder

Shanghai Truer Industrial Development Co., Ltd
Table of Contents
    Add a header to begin generating the table of contents
    High temperature alloy powder

    inconel 625 powder introduction

    IN625 is a grade of alloy with a density of 8.4 g/cm³ and a melting point of 1290-1350°C. It has excellent corrosion resistance to inorganic acids and very good resistance to various corrosive media in both oxidising and reducing environments.

    Inconel 625 powder shows excellent resistance to pitting, crevice corrosion, intergranular corrosion and erosion in chloride.

    inconel 625 powder Properties

    1. Excellent resistance to a wide range of corrosive media in both oxidizing and reducing environments.
    2. Excellent resistance to pitting and crevice corrosion and no stress corrosion cracking due to chlorides.
    3. Excellent resistance to inorganic acids such as nitric acid, phosphoric acid, sulphuric acid, hydrochloric acid, and a mixture of sulphuric and hydrochloric acids.
    4. Excellent resistance to corrosion by mixed solutions of various inorganic acids.
    5. Excellent corrosion resistance in various concentrations of hydrochloric acid solutions at temperatures up to 40°C.
    6. Good workability and weldability, no susceptibility to post-weld cracking.
    7075 aluminium alloy powder
    FeCoNiCrMo

    inconel 625 powder application:

    The softened and annealed low-carbon alloy in625 powder is widely used in the chemical process industry, where its good corrosion resistance and high strength allow it to be used as a thin structural component. in625 powder can be used in applications where it is exposed to seawater and high mechanical stress.

    Typical areas of application.

    1. components for organic chemical processes containing chlorides, especially where acidic chloride catalysts are used
    2. Cookers and bleaching tanks for the pulp and paper industry
    3. Absorption towers, reheaters, flue gas inlet baffles, fans (wet), agitators, deflectors and flue pipes in flue gas desulphurisation systems
    4. Equipment and components for the manufacture of applications in sour gas environments
    5. Reaction generators for acetic acid and anhydride
    6. Sulphuric acid condensers

    inconel 625 powder Chemical Components

                          Element  Contain( Min)  (Max)

    •                        Ni        Bal.          Bal.
    •                        Cr        20           23
    •                        Mo       8             10
    •                        Cu       3.15         4.15
    •                        Fe         /             5
    •                        Al          /             0.4
    •                        Ti          /             0.4
    •                        C          /             0.1
    •                        Mn       /              0.5
    •                        Si         /              0.5
    •                        C          /              1
    •                        P          /              0.015
    •                        S          /              0.015
    3d printing material


    Characteristics of inconel 625 powder :

    • Low pick-up of oxygen and other impurities
    • Perfectly spherical and essentially satellite-free
    • Narrow particle size distribution.
    • high flowability and high packing density
    • Low internal porosity

    about us

    Truer Industry

    shanghai truer am-material

    Shanghai Truer Industrial Development Co., Ltd. was established in 2009 and created the additive manufacturing business in 2019, which is dedicated to building integrating 3D printing powder making equipment and services, high quality 3D printing powders to help engineering applications of additive manufacturing.

    The company not only provides professional selective electron beam melting (SEBM) technology and equipment, but also plasma rotating electrode process powder making (PREP) technology and equipment. We also have various grades of spherical metal powders, including TiNi, TiTa, TiAl, TiNbZr, CoCrMo and so on.

    truer certificate

    Our services

    Various metal powders

    More than 40 grades of high quality spherical metal powders.

    Mature application system

    More than 1000 customized orthopedic implant materials to more than 20 hospitals.

    No risk of stock outage

    Perfect supply chain layout and inventory control make no risk of product stock-out.

    3D Printing Equipment

    SEBM & PREP technology and equipment.

    Support customization

    We accept OEM/ODM 

    Fair prices

    High quality products at reasonable prices

    FAQ

    Most frequent questions and answers

    If you have questions or at any point or can’t find the answer you were looking for, call or email us directly at [email protected]. For issues about your orders or our refunds, please refer to our Team. Helping you answer all your questions and solving any problems you may have is our number one priority.

    We are the 100% manufacturer specialized in Additive Manufacturing.

    Sure. We accept custom orders and OEM/ODM.

    You can get a quote by visiting the Request a Quote page, requesting a quote on a product page, phone, email, or from our live chat. Based on a large variance of requirements from project to project, most quotations need to be prepared by a packaging estimator. RFQs can be emailed directly to [email protected].
    You will typically receive your quotation within 1-2 business days for most requests. RFQs and complex projects may require more time.

    High quantity orders generally net a lower cost-per-unit on all of our orders. For greater savings for your project, you can consult one of our Product Specialists for a customized strategy based on your business requirements and project goals.

    We make products easy for our customers. While the steps can differ from project to project, our typical process consists of the following stages:
    1.    Specification & Project Consultation
    2.    Quotation
    3.    Sampling and Prototyping
    4.    Production
    5.    Shipping and Fulfillment

    We offer a wide range of Additive Manufacturing such as SEBM, PREP and more than 40 different compositions of high-quality spherical metal powders, such as TiNi, TiTa, TiAl, TiNbZr and CoCrMo with fully customizable options.

    Most products need to be shipped by sea, but samples used only for testing may be shipped by courier and air to ensure timeliness. All of our products are carefully packaged with care to withstand the potentially harsh elements of travel. You can expect your products to arrive in the same condition they left our facilities.

    Production time can range from 5 to 25 business days depending on products type, requirements many other factors. Greater customization with more additional processes generally yields slightly longer production times. For your best estimate in the timeline, consult with your Product Specialist.

    While our products technically have no minimum order quantities, recommended MOQs are in place (which will differ based on products type, printing, or processes) to prevent individual unit prices from becoming too costly to recommend.

    The minimum order quantity we can usually provide is 1-20kg for samples(based on the detailed products) and 100-200kg for official orders. But it may vary by product, so, please check with your Product Specialist to learn the recommended MOQ of any of our products.

    Send Us A Message

    Contact us

    sales

    Cassiel Ding
    +86 – 13611869448 [email protected]

    Sales Manager

    Lucy Wen
    +86 – 15250232891
    [email protected]

    Quality Control

    Mike Wu
    +86 – 13862291355 [email protected]

    sales

    Joan Zhou
    +86 – 17316565943 [email protected]

    Customer Service

    Luke Zhang
    +86 – 15250014048 [email protected]

    Scroll to Top