3D printer metal powders are specialty metallic powders used as raw materials in various metal 3D printing processes. These powders allow complex metal parts and components to be fabricated layer-by-layer using additive manufacturing techniques.
Overview of 3D Printer Metal Powders
3D printer metal powders exhibit specific characteristics that make them suitable for additive manufacturing compared to conventional metal powders:
- Finer particle size distribution
- Spherical morphology
- Controlled microstructure and crystallographic texture
- Consistent chemical composition
- Optimized flowability and packing density
These properties allow the powders to be precisely deposited and fused into accurate parts with reliable mechanical properties.
The most common metal powders used are:
- ステンレス
- アルミニウム
- チタン合金
- Cobalt-chrome
- Nickel superalloys
- 銅合金
Various metal 3D printing technologies use powder bed fusion, directed energy deposition, or binder jetting processes. The type of powder is selected based on compatibility with the specific print process.
Table 1: Comparison of Metal 3D Printing Processes
| プロセス | 説明 | Metals Used |
|---|---|---|
| パウダーベッド・フュージョン | Powder spread in thin layers and selectively melted by laser or electron beam | Stainless steel, aluminum, titanium, nickel and cobalt alloys |
| 直接エネルギー蒸着 | Focused thermal energy source melts metal powder injected simultaneously | Stainless steel, titanium, aluminum, cobalt-chrome alloys |
| バインダー・ジェット | Liquid bonding agent selectively joins powder particles together | Stainless steel, tool steel, bronze, tungsten carbide |
Metal Powder Compositions
Here are some of the commonly used metal alloys and their compositions used in commercial 3D printing:
Table 2: Common Metal Powder Compositions
| 合金 | Main Elements | Example Grades |
|---|---|---|
| ステンレス鋼 | Fe、Cr、Ni、Mo | 316L, 17-4PH, 15-5PH, 420 |
| アルミニウム | Al, Si, Mg, Cu | AlSi10Mg, AlSi7Mg0.6, AlSi12 |
| チタン | Ti、Al、V | Ti6Al4V, Ti6Al4V ELI |
| コバルト・クローム | Co, Cr, W, Ni, Fe, Si, Mn, C | CoCr, CoCrMo |
| Nickel Superalloy | Ni, Cr, Co, Mo, W, Al, Ti, Ta | Inconel 625, Inconel 718 |
| Copper Alloy | Cu, Zn | CuSn10, CuCr1Zr |
The ratios of the main alloying elements can be varied to obtain specific microstructures and tailored mechanical properties. Trace additives may also be included for enhanced performance.
Table 3: Elemental Composition Ranges of Common Alloys
| 合金 | Major Constituents (wt%) | Minor Constituents (wt%) |
|---|---|---|
| 316L stainless steel | Cr 16-18, Ni 10-14, Mo 2-3 | C, Si, P, S < 0.1 |
| AlSi10Mg aluminum | Al bal., Si 9-11, Mg 0.2–0.45 | Fe < 0.55, Mn < 0.45, Ti < 0.15 |
| Ti6Al4V titanium | Al 5.5-6.75, V 3.5-4.5 | Fe < 0.3, O < 0.2 |
| CoCrMo cobalt chrome | Co bal., Cr 26-30, Mo 5-7 | Si < 1, Mn < 1, C < 0.35, Fe < 0.75 |
| Inconel 718 nickel alloy | Ni 50-55, Cr 17-21, Nb+Ta 4.75-5.5 | Mo 2.8-3.3, Ti 0.65-1.15 |
Metal Powder Properties
The properties of metal powders determine print quality, part functionality and production economics:
Table 4: Key Properties of Metal Powders for Additive Manufacturing
| プロパティ | 典型的な範囲 | 役割 |
|---|---|---|
| 粒子径 | 10-75 μm | Affects layer thickness, detail resolution, density |
| 形態学 | Predominantly spherical | Influences packing, spreadability, flow |
| 見かけ密度 | Up to 80% of solid | Determines quantity required to build parts |
| タップ密度 | Up to 90% of solid | Indicates packing efficiency during processing |
| 流量 | Up to 50 s/50g | Ensure smooth powder spreading during printing |
| Chemical purity | Up to 99.9% target metal | Avoids reaction products or inclusions |
The specifications depend on the exact part quality and mechanical properties needed.
For most metals in laser-based processes, the ideal powder size is ~20-45 μm for optimized part density (>99%) and surface finish (Ra 5-15 μm).
Spherical powders flow and spread evenly. Irregular shapes negatively impact packing and cause defects. Powders for binder jetting can be 10-100 μm since there is no melting.
Higher apparent and tap densities lead to better utilization of expensive metal powders during printing. Lower densities cause excess wastage.
Reliable flow ensures uniform layers. Poor flow causes uneven melting and distorted builds. Moisture absorption severely reduces flowability.
Even minor impurities can degrade alloy properties or clog print nozzles. Use of high purity raw materials is critical.
Table 5: Supplier Specifications for Common Metal Powders
| 素材 | サイズ範囲 | 酸素含有量 | タップ密度 | 流量 |
|---|---|---|---|---|
| 316L stainless | 15-45 μm | < 0.1 wt% | Up to 4.2 g/cc | < 40 s |
| AlSi10Mg | 25-55 μm | < 0.45 wt% | Up to 2.7 g/cc | < 32 s |
| Ti6Al4V | 10-75 μm | < 0.13 wt% | Up to 2.7 g/cc | < 50 s |
| CoCr | 20-63 μm | < 0.1 wt% | Up to 4.4 g/cc | < 60 s |
| Inconel 718 | 10-45 μm | < 0.04 wt% | Up to 4.5 g/cc | < 45 s |
Operating within the recommended range ensures high product quality. Excess variation risks defects.
Metal Powder Applications
Here are some examples of end-use applications taking advantage of 3D printed metal parts, along with the typical alloys used:
Table 6: End-use Applications and Alloys for Metal AM Parts
| 産業 | 申し込み | Metals Used | メリット |
|---|---|---|---|
| 航空宇宙 | Turbine blades, frames, antennas | Ti alloys, Ni superalloys, Al alloys | Weight savings, complex cooling channels |
| 自動車 | Brake levers, pistons, manifolds | Al alloys, stainless steel | Performance gains, consolidated assemblies |
| メディカル | Orthopedic implants, surgical tools | Ti, CoCr, stainless steel | Patient-specific shapes, bio-compatibility |
| 石油・ガス | Valve bodies, pump impellers | Stainless steel, Inconel | Withstand extreme environments |
| 消費者 | Jewelry, decorative art | Gold alloys, silver | Intricate geometries, custom designs |
Metal additive enables lighter, stronger products optimal for each function at lower costs compared to traditional fabrication processes in small batch production scenarios.
Table 7: Highlights of Metal 3D Printing vs Traditional Methods
| メートル | Metal AM | Subtractive Machining | Casting |
|---|---|---|---|
| パート・コンプレックス | No restrictions | Limited by tool access | Restricted by molds |
| カスタマイズ | Easily change designs | New programs required | Redesign patterns |
| 営業費用 | Low up to 10,000 parts | High setup costs | High tooling costs |
| 機械的性質 | Similar or exceed | Depends on method | Varies, heat treatment |
FAQ:
Q: What is the difference between pre-alloyed and blended elemental metal powders?
A: Pre-alloyed powders have the target alloy composition pre-made by the manufacturer, ensuring chemical homogeneity. Blended elemental powders consist of pure metal powders that are mixed together in the target ratios before printing, combining during melting.
Q: How are these powder properties measured and analyzed?
A: Particle size distribution is quantified by laser diffraction analysis. Morphology and microstructure are studied under scanning electron and optical microscopy. Densities are measured by Hall flowmeter and tapped density tester instruments per ASTM standards. Chemical analysis is done using atomic absorption or emission spectroscopy and inert gas fusion for oxygen and nitrogen content.
