Ultimate Guide to FD-0200 Powder for B2B Buyers

Partager cet article

Table des matières

1. Introduction: Why FD-0200 Powder is Critical in Powder Metallurgy

FD-0200 powder is a diffusion alloyed steel powder widely used in powder metallurgy (PM) for the production of high-strength structural components. Designed for applications requiring a balance of strength, machinability, and cost-effectiveness, FD-0200 excels in automotive, industrial, and tooling sectors.

From a B2B standpoint, manufacturers, OEMs, and bulk component fabricators value FD-0200 for its:

  • High sintered strength
  • Excellent dimensional stability
  • Consistent performance across large production runs
  • Cost-efficient processing in high-volume manufacturing

For wholesale buyers and distributors, sourcing FD-0200 from a reliable and consistent supplier is critical to ensure part integrity and supply chain stability.

2. Industrial Applications of FD-0200 Powder

FD-0200 powder’s metallurgical profile makes it suitable for a range of applications across multiple sectors. Below are key industries and typical components manufactured using this PM-grade steel:

L'industrieExemples d'applicationExigences clés
AutomobileGear hubs, synchronizer hubs, camshaft sprockets, bushingsHigh fatigue strength, wear resistance
Outils électriquesStructural housings, motor supportsStructural integrity, machinability
Machines agricolesGears, flanges, drive componentsDurability, corrosion resistance
Électronique grand publicMechanical locking systems, bracketsDimensional precision, low porosity
Équipement industrielBrackets, flanges, pump partsHigh density, tensile strength

Key Benefits for OEMs and Distributors:

  • Reduced material waste through near-net shape manufacturing
  • Lower tooling and machining costs
  • Compatibility with high-speed compaction and sintering lines
  • Reliable bulk supply for large-scale production

3. Key Properties and Technical Specifications

FD-0200 is classified as a diffusion alloyed steel powder. It typically contains iron, copper, and carbon, pre-alloyed or diffusion bonded to provide uniform microstructure and improved sintering response. Below is a technical breakdown of its typical characteristics:

PropriétéSpécifications
Base CompositionIron-Copper-Carbon
Density (Green)~6.6 g/cm³
Density (Sintered)~7.2 – 7.4 g/cm³
Typical Hardness20–30 HRC
Résistance à la traction550–700 MPa
Limite d'élasticité440–580 MPa
Élongation~2–4%
Dimensional ChangeLow; good stability

Processing Method Compatibility:

  • Single-press, single-sinter
  • Double-press, double-sinter
  • Warm compaction for higher density parts

Caractéristiques de la poudre :

  • Excellent flowability
  • Distribution uniforme de la taille des particules
  • Minimal segregation during transport and storage

Typical Use Cases for FD-0200:

  • Transmission Components: The powder’s mechanical strength supports the load-bearing needs of gears and sprockets.
  • Fasteners and Bushings: Dimensional precision and machinability make it ideal for high-speed production lines.
  • Pump Parts: Corrosion resistance and internal strength enhance lifespan in fluid and oil-exposed environments.

For more detailed technical data and product support, visit Shanghai Truer’s FD-0200 Powder Product Page.

PREP FeCoNiCrMo
Ultimate Guide to FD-0200 Powder for B2B Buyers 4

4. Market Demand, Trends & Growth Forecast for FD-0200

The global powder metallurgy (PM) market is expanding rapidly, driven by increased demand in automotive, aerospace, and industrial machinery. FD-0200 powder is one of the most widely used grades due to its balance of performance and cost—making it a staple in high-volume production environments.

Key Market Trends Driving FD-0200 Demand:

  • Automotive Electrification: As EV adoption increases, lightweight and durable PM components (like those made from FD-0200) are needed for motors, gear systems, and structural supports.
  • Cost-Efficiency in Mass Production: OEMs are under pressure to reduce costs. PM manufacturing using FD-0200 offers material efficiency and lower total production cost compared to forged or machined parts.
  • Sustainability Push: With minimal material waste and energy-efficient sintering, PM processes using FD-0200 align with global sustainability goals.

Market Forecast:

RégionCAGR (2024–2029)Facteurs clés
Asie-Pacifique7.4%Automotive production, industrialization
Amérique du Nord5.9%Aerospace, defense, auto components
L'Europe6.2%EV growth, green manufacturing mandates

FD-0200 Wholesale Opportunity:

  • OEMs & Tier 1 Suppliers: Increasing demand for high-volume, high-strength parts.
  • Contract Manufacturers: Need consistent, reliable powder supply for batch production.
  • Distributors: Opportunity to stock a high-demand material with steady reorder rates.

5. Selecting a Reliable FD-0200 Powder Supplier

Choosing the right supplier is critical for maintaining part consistency, quality, and production reliability—especially when sourcing in bulk for B2B operations.

What to Evaluate When Choosing a Supplier:

FacteurImportanceQuestions to Ask
Material ConsistencyHautIs the powder ISO-certified? What’s the deviation tolerance?
Capacité de productionHautCan the supplier meet my volume needs long-term?
Support techniqueMoyenDo they offer engineering consultation or custom blends?
Fiabilité des livraisonsHautWhat’s the lead time? Are there local distribution hubs?
Pricing & ContractsMoyenAre there bulk discount tiers or long-term pricing agreements?
Reputation & ExperienceHautHow long has the supplier been in the PM industry?

Red Flags to Avoid:

  • Inconsistent particle size or blend uniformity
  • Lack of documentation or traceability
  • No dedicated B2B support team or technical liaison
  • Limited production capacity or unstable supply chain

For a reliable B2B sourcing experience, ensure your supplier has strong industry experience, internal QA protocols, and the ability to customize solutions based on your production needs.

6. Top Global Suppliers and Regional Distributors

Here’s a comparative look at some of the most trusted names in the FD-0200 powder space:

EntrepriseRégionPoints fortsLimites
Hoganas ABL'EuropeGlobal reach, consistent qualityPremium pricing
Rio Tinto Metal PowdersAmérique du NordLarge capacity, wide PM product lineLonger lead times outside NA
Shanghai Truer TechnologyChineCompetitive pricing, wide composition range, advanced techBest for Asia and global B2B importers
Acier JFEJaponHigh-quality iron-based powdersLimited customization options
GKN HoeganaesMondialExtensive R&D, strong PM networkHigher MOQ for smaller buyers

Why Shanghai Truer Technology Is Gaining Market Share

Shanghai Truer Technology Co., Ltd is emerging as a preferred choice for FD-0200 powder among global B2B buyers due to:

  • Established Expertise: Over 14 years in powder metallurgy and additive manufacturing
  • Full Product Spectrum: Offers FD-0200 and dozens of other PM powders including diffusion alloyed steel, stainless steel, and hybrid low-alloy grades
  • Custom Blending & Engineering Services: Ability to tailor powder solutions to meet specific sintering and density targets
  • Production Technology: Supports water atomization, gas atomization, and combined atomization for maximum flexibility
  • B2B Support Infrastructure: Dedicated account management, fast shipping, and multilingual support

Buyers can learn more about Truer’s history and capabilities on their A propos de nous.

PREP FeCoNiCrMn
Ultimate Guide to FD-0200 Powder for B2B Buyers 5

7. Why More Buyers Are Switching to Chinese FD-0200 Suppliers

Over the last decade, China has emerged as a global leader in powder metallurgy production, offering advanced manufacturing capabilities and competitive pricing. For B2B buyers, especially wholesalers, contract manufacturers, and OEMs, sourcing FD-0200 powder from China presents several strategic advantages.

Key Reasons for the Shift to Chinese Suppliers:

Rapport coût-efficacité
Chinese PM powder producers offer significantly lower prices without compromising on quality, thanks to economies of scale and vertically integrated supply chains.

Large-Scale Production Capacity
China’s PM industry supports high-volume production with fast lead times, which is attractive for enterprise buyers managing tight manufacturing schedules.

Procédés de fabrication avancés
Modern Chinese suppliers use state-of-the-art atomization technologies (water, gas, hybrid) and robust quality control systems that rival Western standards.

Customization Flexibility
Chinese manufacturers are more open to custom blending, packaging variations, and logistics solutions tailored to bulk buyers and distributors.

Shorter Supply Chains in Asia-Pacific
For buyers based in Asia-Pacific, sourcing from China reduces shipping time and cost significantly compared to sourcing from North America or Europe.

Common Misconceptions (Debunked):

MythReality
Chinese powders are lower qualityTop-tier Chinese suppliers like Shanghai Truer meet or exceed ISO standards
Communication is difficultMany suppliers offer multilingual B2B support
Lead times are longFast production cycles and efficient shipping logistics are standard for export orders

If you’re evaluating a shift in your sourcing strategy, it’s time to explore the cost, quality, and flexibility of Chinese FD-0200 powder suppliers.


8. Why Choose Shanghai Truer Technology as Your FD-0200 Partner

Shanghai Truer Technology Co., Ltd is not just another supplier — it’s a strategic B2B partner for businesses seeking reliable, high-performance FD-0200 powder at wholesale volumes.

Company Overview:

  • Fondée: 2009
  • PM Division Launched: 2019
  • Spécialisation: Impression 3D powder making equipment, additive manufacturing powder, and PM powders
  • Méthodes de production: Water atomized, gas atomized, carbonyl, reduction, and combined atomization

Explore more about Truer’s PM and additive manufacturing capabilities on their page d'accueil.

Why Truer Stands Out for B2B Buyers:

FonctionnalitéBenefit for Buyers
Wide Grade PortfolioFD-0200, FD-0208, FL-4605, FN-5000, and more available for bulk orders
Flexible AtomizationChoose water, gas, or hybrid atomization depending on your part specs
Engineering SupportWork directly with metallurgists to optimize powder for your application
ISO-Certified ProductionEnsures consistent quality, traceability, and compliance
Logistics & PackagingCustom packaging options and global export support for wholesale orders

Product Range Beyond FD-0200:

  • PM copper steel (Fe-Cu) powders
  • Diffusion CuSn powder for sintered bearings and diamond tools
  • Graphite additives like TBC-400, TBC-1000
  • Lubricants for powder pressing: Lube-W, SUW-5000B
  • Advanced cutting agents: SME-100, manganese sulfide, TD-8

If your operations require more than just FD-0200, Truer can bundle multiple powder types and additives into one shipment — saving time and reducing procurement complexity.

📌 To discuss your specific sourcing needs, visit the Page de contact and get in touch with Truer’s B2B sales team.


poudres d'hastelloy
Ultimate Guide to FD-0200 Powder for B2B Buyers 6

9. FAQs: Buying FD-0200 Powder in Bulk

Here are the most common questions B2B buyers ask when sourcing FD-0200 powder:

Q1: What is the minimum order quantity (MOQ) for FD-0200 powder from Truer?

👉 Truer’s standard MOQ for FD-0200 is 500 kg, but volume discounts start at 1 ton. Custom MOQ options are available for long-term contracts.

Q2: Can I request a custom blend or modified formulation?

👉 Yes. Truer offers engineering consultation to develop FD-0200 variants tailored to your sintering process or mechanical strength needs.

Q3: How is FD-0200 packaged for export?

👉 Standard packaging includes:

  • 25 kg sealed bags
  • 1-ton super sacks (FIBC)
  • Vacuum-sealed containers for moisture-sensitive variants

Custom packaging and labeling are available upon request.

Q4: Does Truer provide COA and MSDS documents?

👉 Absolutely. Each shipment includes:

  • Certificate of Analysis (COA)
  • Material Safety Data Sheet (MSDS)
  • Batch traceability documentation

Q5: How long does shipping take?

👉 For international orders:

RégionEstimated Delivery Time
Asie-Pacifique5–10 days
L'Europe14–20 days
Amérique du Nord18–25 days

Expedited shipping options and FOB/CIF terms are available.

Q6: Can Truer help with application testing?

👉 Yes. Truer’s metallurgical team can assist with trial batching, test sintering, and application-specific performance evaluations for FD-0200 and other PM powders.


If you’re ready to streamline your supply chain and reduce costs without sacrificing quality, FD-0200 powder from Shanghai Truer Technology is your ideal solution. You can browse their full PM powder catalog on the PM Powder product page.


✅ Summary of Internal Links Used:

  1. À propos de nous – for company background
  2. Homepage – for full product and service offerings
  3. Nous contacter – for inquiries and B2B support
  4. PM Powder Product Page – for technical specs and portfolio
  5. FD-0200 Powder Product Page – used earlier for product-specific navigation

Want to learn more about FD-0200 or get a custom quote? Contact Truer’s B2B team today and experience a smarter way to source powder metallurgy materials.

S'abonner à notre lettre d'information

Obtenir des mises à jour et apprendre des meilleurs

Plus d'informations à découvrir

Défiler vers le haut