Ti-6Al-4V (also known as Grade 5) is a common titanium alloy containing 6% aluminum and 4% vanadium, valued for its high strength-to-weight ratio, good corrosion resistance, and biocompatibility. It is widely used in aerospace, medical, and marine industries for applications like aircraft components, engine parts, and surgical implants. This alloy is known as the “workhorse” of titanium alloys […]
Ti-6Al-4V Printed Part Mechanical Property Leia mais "
Laser-DED Process of Inconel 718 Alloy Powder Compared with wire-based materials, Inconel 718 alloy powder feed offers higher material utilization and greater cost efficiency. The feeding process is faster, and when combined with the high energy concentration of the laser, it significantly enhances deposition efficiency. Layer-by-layer deposition enables the flexible fabrication of complex metal components,
Laser-DED Process of Inconel 718 Alloy Powder Leia mais "
AlN and SiN Powder for Ceramic Substrate Aluninum nitride is a white to pale yellow powder that is 8-10 times more thermally conductive than alumina. Aluminum Nitride is a strategic ceramic material which posesses a unique combination of high thermal conductivity and remarkable insulation properties. High thermal conductivity, high chemical purity, thermal shock resistance, corrosion
AlN and SiN Powder for Ceramic Substrate Leia mais "
β-Titanium alloys β-Titanium alloys include Ti-5Al-5Mo-5V-3Cr-0.5Fe Titanium alloy, Ti-5Ta-1.8Nb Titanium alloy, Ti-3Al-8V-6Cr-4Mo-4Zr Titanium alloy, Ti-4.5Sn-6Zr-11.5Mo Titanium alloy, Ti-8Mo-8V-2Fe-3Al Titanium alloy, Ti-30Nb-1Mo-4Sn Titanium alloy, Ti-15Mo Titanium alloy, TiNbTaZr Titanium alloy and Ti-13V-11Cr-3Al Titanium alloy etc. TRUER Ti-5Al-5V-5Mo-3Cr Powder: TRUER TiNb Powder: Morphology of Truer β-Titanium alloy Powder: β-Titanium alloys has excellent biocompatibility and mechanical properties, so
Laser Wire Directed Energy Deposition (L-DED) of Ti-6Al-4V Ti-6Al-4V is one of the most widely used titanium alloys in laser wire directed energy deposition (L-DED) due to its excellent mechanical properties, corrosion resistance, and strong industrial adaptability. It shows significant potential for aerospace applications. Compared with other methods, the L-DED process offers higher material utilization,
Laser Wire Directed Energy Deposition (L-DED) of Ti-6Al-4V Leia mais "
Surface Repair of 7075 Aluminum Alloy by AFSD 7075 aluminum alloys are widely used in aerospace and transportation due to their high strength and excellent corrosion resistance. However, under extreme service conditions, these aluminum alloy components are prone to surface damage such as wear, impact, and corrosion. Traditional repair methods often deteriorate the material’s properties,
Surface Repair of 7075 Aluminum Alloy by AFSD Leia mais "
Nano Copper and Nickel Powder TRUER R&D team had continuously researched and developed nano copper and nickel powder since 2021 and form independent production line for nano spherical copper and nickel powder and flake copper powder in 2023. Morphology of 300 nano spherical copper powder: Our 300 nano spherical copper powder has excellent dispersibility, high
Nano Copper and Nickel Powder Leia mais "
TiN Powder TiN powder (Titanium Nitride powder) is a ceramic compound and a material with distinct properties and applications for its extreme hardness, high melting point, chemical stability, and electrical conductivity, making it useful in wear-resistant coatings, cutting tools, electronics, and decorative finishes. Our Titanium Nitride (TiN) powder is produced by Vacuum Nitriding or Spray
WC-Ni60 Powder WC-Ni60 powder is a composite material combining tungsten carbide (WC) and Ni60 nickel-based alloy (NiCrBSiFe), primarily used in wear-resistant coatings for components like brake discs. The tungsten carbide provides extreme hardness to resist wear, while the Ni60 alloy offers good corrosion, oxidation, and heat resistance, acting as a binder to form dense, high-performance coatings with
WC-12Co Powder WC-12Co powder is usually composed of cemented tungsten carbide skeleton and cobalt metal binder, is a kind of material with excellent hardness and excellent wear resistance, which is convenient for its application in the manufacturing of cutting tools, drills, wear parts, etc. Generally, WC-12Co powder is produced by Sintering Crushing or ball milling