Composite material by 430L and TiC Powder The composite materials are obtained by ball milling process using mixed powders of 430L stainless steel powder with TiC powder, and then performing hot isostatic pressing. Pre-treatment of Powder: This study utilized two types of raw materials of powders: 430L stainless steel powder (particle size 45-150 μm) by […]
Composite material by 430L and TiC Powder 続きを読む "
New type of copper-nickel alloy powder Our CuNi10 or CuNi30 powders produced by PREP, are developed with sustainable high-performance aiming to meet the growing demand for corrosion-resistant and highly conductive materials in demanding applications such as marine, energy, and industrial sectors. CuNi10 powders or CuNi30 is renowned for its outstanding corrosion resistance, excellent thermal and
New type of copper-nickel alloy powder 続きを読む "
Breakthrough of High Thermal Conductivity of Oxygen-free Pure Copper In the field of thermal management, pure copper has always been regarded as the standard material for thermal conductivity. The theoretical thermal conductivity value of oxygen-free pure copper is approximately 401W/(m·K). However, it was found the pure copper printed parts by high-purity oxygen-free copper powder with
Breakthrough of High Thermal Conductivity of Oxygen-free Pure Copper 続きを読む "
The Effects of Graphite and Mo₂C Particles on the Sintering and Mechanical Properties of 18Cr4VNbMo Powder 18Cr4VNbMo is a high-carbon alloy steel commonly used in the manufacture of cutting tools. Its mechanical properties are significantly superior to those of traditional manufacturing through the super-solidification line liquid-phase sintering (SLPS) based on the temperature difference between the
904L stainless steel powder for laser cladding 904L stainless steel, as an ultra-low-carbon and highly alloyed austenitic stainless steel, is renowned worldwide for its outstanding corrosion resistance. When this material is applied in powder form to laser cladding technology, its application field is further enhanced and expanded. This article will systematically analyze the technical characteristics
904L stainless steel powder for laser cladding 続きを読む "
FeNi30 Alloy Powder for 3D Printing FeNi30 alloy powder is a type of iron-nickel alloy powder material with a nickel content of approximately 30%, which is corresponding to the soft magnetic alloy grade 1J30. It achieves an excellent balance between cost and performance through ingenious composition design, making it an indispensable basic material in multiple
FeNi30 Alloy Powder for 3D Printing 続きを読む "
CuAl10 Alloy Powder by PREP for 3D Printing CuAl10 alloy powder for additive manufacturing CuAl10 alloy is a high-strength aluminum bronze alloy, featuring excellent corrosion resistance (in seawater / acids and alkalis), low friction coefficient and wear resistance, heat resistance below 400°C, and good processability. CuAl10 alloy is widely used in marine engineering, mechanical manufacturing,
CuAl10 Alloy Powder by PREP for 3D Printing 続きを読む "
Additive Manufacturing of CuCrZr Copper Alloy Powder The core challenge of high reflectivity and formability in CuCrZr additive manufacturing is the basis of existing material technology. Through strict control of raw material powder quality, precise adjustment of alloy composition, and optimization of forming processes, it has successfully upgraded the CuCrZr copper alloy powder. This material
Additive Manufacturing of CuCrZr Copper Alloy Powder 続きを読む "
Stellite 6 Powder Produced by PREP Process-Stellite 6 Alloy Stellite 6 is a super alloy based on cobalt. Its most notable feature is its high hardness, excellent wear resistance and corrosion resistance.These properties are typically achieved through the dispersion of a large amount of carbide hard phases (such as Cr7C3) within the cobalt-based solid solution,
Stellite 6 Powder Produced by PREP Process 続きを読む "
Ti-6Al-4V (also known as Grade 5) is a common titanium alloy containing 6% aluminum and 4% vanadium, valued for its high strength-to-weight ratio, good corrosion resistance, and biocompatibility. It is widely used in aerospace, medical, and marine industries for applications like aircraft components, engine parts, and surgical implants. This alloy is known as the “workhorse” of titanium alloys
Ti-6Al-4V Printed Part Mechanical Property 続きを読む "