ニュース

F55ステンレス鋼粉末

2026年の7050アルミニウム粉末:組成、仕様、およびAMとの互換性

Quick Answer 7050 aluminium powder is the powder-metallurgy form of the aerospace workhorse AA7050, an Al-Zn-Mg-Cu alloy prized for the best combination of high strength, fracture toughness, and stress-corrosion resistance in the 7xxx series. Gas-atomized spherical powder is supplied in 15-45 um cuts for LPBF and 20-63 um or coarser fractions for DED, cold spray,

2026年の7050アルミニウム粉末:組成、仕様、およびAMとの互換性 続きを読む "

CX ステンレス鋼粉末

CM247LC PREP 球状粉末の認証および試験に関する専門ガイド

Quick Answer CM247LC PREP spherical powder is a high-gamma-prime nickel superalloy powder produced by the plasma rotating electrode process, delivering the creep strength of the cast CM247LC blade alloy in a crucible-free, ultra-clean powder form for additive manufacturing and hot isostatic pressing. With roughly 65-70 volume percent gamma prime, the alloy sustains service temperatures to

CM247LC PREP 球状粉末の認証および試験に関する専門ガイド 続きを読む "

ガスアトマイズ金属粉

粉末床溶融システムにおける7075アルミニウム合金粉末の性能

Quick Answer 7075 aluminium alloy powder is a spherical Al-Zn-Mg-Cu feedstock (nominal 5.6% Zn, 2.5% Mg, 1.6% Cu, balance Al) that brings the strongest of the standard wrought aluminium alloys into powder bed fusion, powder metallurgy, and thermal spray processes. Its performance profile in LPBF is best described as high-reward, high-discipline: properly processed and T6

粉末床溶融システムにおける7075アルミニウム合金粉末の性能 続きを読む "

TC18

産業用AM向けの高品質なC18150銅・クロム・ジルコニウム粉末の調達方法

Quick Answer C18150 copper chromium zirconium powder is a spherical Cu-Cr-Zr precipitation-hardening alloy feedstock (UNS C18150, nominal 0.5-1.5% Cr, 0.05-0.25% Zr, balance Cu) used in laser powder bed fusion, directed energy deposition, and powder metallurgy to produce components that must combine high electrical and thermal conductivity with useful strength at elevated temperature. After solution treatment

産業用AM向けの高品質なC18150銅・クロム・ジルコニウム粉末の調達方法 続きを読む "

PREP FeCoNiCrMo

Fecomnnicu『2026年の高エントロピー合金:先進AM材料選定ガイド』

Quick Answer FeCoMnNiCu high entropy alloy powder is a spherical, near-equiatomic five-component feedstock (approximately 20 at% each of iron, cobalt, manganese, nickel, and copper) belonging to the high entropy alloy (HEA) family, supplied for laser powder bed fusion, directed energy deposition, binder jetting, and powder metallurgy research and pilot production. The alloy forms a predominantly

Fecomnnicu『2026年の高エントロピー合金:先進AM材料選定ガイド』 続きを読む "

SEM写真 AISi10Mg

2026年のAizn10被覆粉末:特性と産業用途

Quick Answer AlZn10 cladding powder is a spherical aluminium-zinc alloy feedstock containing approximately 10% zinc with the balance aluminium, used primarily in thermal spraying (arc, flame, and atmospheric plasma spray) and laser cladding to deposit sacrificial corrosion-protection coatings on steel structures and to clad or repair high-strength aluminium components. Its engineering value rests on electrochemistry:

2026年のAizn10被覆粉末:特性と産業用途 続きを読む "

モリブデンチタン粉末

2026年のFeni50軟磁性粉末:粉末冶金に関する専門家ガイド

Quick Answer FeNi50 soft magnetic powder is a spherical iron-nickel alloy feedstock containing approximately 50% nickel with the balance iron, positioned in the middle of the Fe-Ni soft magnetic family between the expansion-matched FeNi42 and the ultra-high-permeability 78-80% nickel permalloys. It delivers the best balance of magnetic properties per dollar in the family: saturation flux

2026年のFeni50軟磁性粉末:粉末冶金に関する専門家ガイド 続きを読む "

GAハステロイX

すべてのエンジニアが知っておくべき、ハステロイC276溶接用粉末の7つの重要な特性

Quick Answer Hastelloy C276 welding powder is a spherical Ni-Mo-Cr alloy feedstock (UNS N10276, nominal 57% Ni, 16% Mo, 15.5% Cr, 4% W, 5% Fe) used for plasma transferred arc (PTA) cladding, laser cladding, directed energy deposition (DED), and increasingly laser powder bed fusion of corrosion-resistant components. Seven properties define its engineering value: outstanding resistance

すべてのエンジニアが知っておくべき、ハステロイC276溶接用粉末の7つの重要な特性 続きを読む "

SLMアディティブ・マニュファクチャリング

LPBF向けにヘインズ188コバルト合金粉末の加工パラメータを最適化する方法

Quick Answer Haynes 188 cobalt alloy powder is a spherical Co-Ni-Cr-W superalloy feedstock (UNS R30188) designed for laser powder bed fusion and directed energy deposition of components that must survive oxidizing environments up to 1095 deg C (2000 deg F). Its signature ingredient is a small lanthanum addition (0.02-0.12%) that dramatically improves the adherence of

LPBF向けにヘインズ188コバルト合金粉末の加工パラメータを最適化する方法 続きを読む "

4340 低合金鋼粉末

粉末床溶融システムにおける4340合金鋼粉末の性能

Quick Answer 4340 alloy steel powder is a spherical Ni-Cr-Mo low alloy steel feedstock (nominal 0.40% C, 1.8% Ni, 0.8% Cr, 0.25% Mo, balance Fe) used in laser powder bed fusion, directed energy deposition, binder jetting, and powder metallurgy to produce ultra-high-strength structural parts. In powder bed fusion systems it performs well but demands respect

粉末床溶融システムにおける4340合金鋼粉末の性能 続きを読む "

上部へスクロール