nouvelles

Quick Answer Spherical pure iron powder is a high-purity iron feedstock produced in rounded particles for additive manufacturing, powder metallurgy, and related thermal processes. It is chosen for 3D printing when engineers need good powder flow, reliable layer spreading, predictable sintering or melting behavior, and a simple ferrous chemistry that supports magnetic, structural, or process-development

Quick Answer Gas atomized spherical pure iron powder is a high-purity ferrous feedstock made by disintegrating molten iron with high-pressure gas so the droplets solidify into near-spherical particles. For additive manufacturing, it is chosen when users need good flowability, consistent powder spreading, high packing density, and low alloy complexity. In practical terms, it fits applications

Quick Answer FeNi42 soft magnetic powder is the powder-metallurgy form of Alloy 42, a 42 percent nickel-iron alloy that uniquely combines soft magnetic behavior with a very low, glass-matching coefficient of thermal expansion. Gas-atomized spherical powder is supplied in 15-45 um cuts for LPBF, 45-106 um for EBM and HIP, and fine fractions below 25

Quick Answer 7050 aluminium powder is the powder-metallurgy form of the aerospace workhorse AA7050, an Al-Zn-Mg-Cu alloy prized for the best combination of high strength, fracture toughness, and stress-corrosion resistance in the 7xxx series. Gas-atomized spherical powder is supplied in 15-45 um cuts for LPBF and 20-63 um or coarser fractions for DED, cold spray,

Quick Answer CM247LC PREP spherical powder is a high-gamma-prime nickel superalloy powder produced by the plasma rotating electrode process, delivering the creep strength of the cast CM247LC blade alloy in a crucible-free, ultra-clean powder form for additive manufacturing and hot isostatic pressing. With roughly 65-70 volume percent gamma prime, the alloy sustains service temperatures to

Quick Answer 7075 aluminium alloy powder is a spherical Al-Zn-Mg-Cu feedstock (nominal 5.6% Zn, 2.5% Mg, 1.6% Cu, balance Al) that brings the strongest of the standard wrought aluminium alloys into powder bed fusion, powder metallurgy, and thermal spray processes. Its performance profile in LPBF is best described as high-reward, high-discipline: properly processed and T6

Quick Answer C18150 copper chromium zirconium powder is a spherical Cu-Cr-Zr precipitation-hardening alloy feedstock (UNS C18150, nominal 0.5-1.5% Cr, 0.05-0.25% Zr, balance Cu) used in laser powder bed fusion, directed energy deposition, and powder metallurgy to produce components that must combine high electrical and thermal conductivity with useful strength at elevated temperature. After solution treatment

Quick Answer FeCoMnNiCu high entropy alloy powder is a spherical, near-equiatomic five-component feedstock (approximately 20 at% each of iron, cobalt, manganese, nickel, and copper) belonging to the high entropy alloy (HEA) family, supplied for laser powder bed fusion, directed energy deposition, binder jetting, and powder metallurgy research and pilot production. The alloy forms a predominantly

Quick Answer AlZn10 cladding powder is a spherical aluminium-zinc alloy feedstock containing approximately 10% zinc with the balance aluminium, used primarily in thermal spraying (arc, flame, and atmospheric plasma spray) and laser cladding to deposit sacrificial corrosion-protection coatings on steel structures and to clad or repair high-strength aluminium components. Its engineering value rests on electrochemistry:

Quick Answer FeNi50 soft magnetic powder is a spherical iron-nickel alloy feedstock containing approximately 50% nickel with the balance iron, positioned in the middle of the Fe-Ni soft magnetic family between the expansion-matched FeNi42 and the ultra-high-permeability 78-80% nickel permalloys. It delivers the best balance of magnetic properties per dollar in the family: saturation flux