truer-joan

904L stainless steel powder for laser cladding 904L stainless steel, as an ultra-low-carbon and highly alloyed austenitic stainless steel, is renowned worldwide for its outstanding corrosion resistance. When this material is applied in powder form to laser cladding technology, its application field is further enhanced and expanded. This article will systematically analyze the technical characteristics […]

FeNi30 Alloy Powder for 3D Printing FeNi30 alloy powder is a type of iron-nickel alloy powder material with a nickel content of approximately 30%, which is corresponding to the soft magnetic alloy grade 1J30. It achieves an excellent balance between cost and performance through ingenious composition design, making it an indispensable basic material in multiple

CuAl10 Alloy Powder by PREP for 3D Printing CuAl10 alloy powder for additive manufacturing CuAl10 alloy is a high-strength aluminum bronze alloy, featuring excellent corrosion resistance (in seawater / acids and alkalis), low friction coefficient and wear resistance, heat resistance below 400°C, and good processability. CuAl10 alloy is widely used in marine engineering, mechanical manufacturing,

Additive Manufacturing of CuCrZr Copper Alloy Powder The core challenge of high reflectivity and formability in CuCrZr additive manufacturing is the basis of existing material technology. Through strict control of raw material powder quality, precise adjustment of alloy composition, and optimization of forming processes, it has successfully upgraded the CuCrZr copper alloy powder. This material

Stellite 6 Powder Produced by PREP Process-Stellite 6 Alloy Stellite 6 is a super alloy based on cobalt. Its most notable feature is its high hardness, excellent wear resistance and corrosion resistance.These properties are typically achieved through the dispersion of a large amount of carbide hard phases (such as Cr7C3) within the cobalt-based solid solution,

Laser-DED Process of Inconel 718 Alloy Powder Compared with wire-based materials, Inconel 718 alloy powder feed offers higher material utilization and greater cost efficiency. The feeding process is faster, and when combined with the high energy concentration of the laser, it significantly enhances deposition efficiency. Layer-by-layer deposition enables the flexible fabrication of complex metal components,

AlN and SiN Powder for Ceramic Substrate Aluninum nitride is a white to pale yellow powder that is 8-10 times more thermally conductive than alumina. Aluminum Nitride is a strategic ceramic material which posesses a unique combination of high thermal conductivity and remarkable insulation properties. High thermal conductivity, high chemical purity, thermal shock resistance, corrosion

β-Titanium alloys β-Titanium alloys include Ti-5Al-5Mo-5V-3Cr-0.5Fe Titanium alloy, Ti-5Ta-1.8Nb Titanium alloy, Ti-3Al-8V-6Cr-4Mo-4Zr Titanium alloy, Ti-4.5Sn-6Zr-11.5Mo Titanium alloy, Ti-8Mo-8V-2Fe-3Al Titanium alloy, Ti-30Nb-1Mo-4Sn Titanium alloy, Ti-15Mo Titanium alloy, TiNbTaZr Titanium alloy and Ti-13V-11Cr-3Al Titanium alloy etc. TRUER Ti-5Al-5V-5Mo-3Cr Powder: TRUER TiNb Powder: Morphology of Truer β-Titanium alloy Powder: β-Titanium alloys has excellent biocompatibility and mechanical properties, so