{"id":4358,"date":"2022-07-19T09:31:32","date_gmt":"2022-07-19T01:31:32","guid":{"rendered":"https:\/\/am-material.com\/?p=4358"},"modified":"2025-08-25T16:32:30","modified_gmt":"2025-08-25T08:32:30","slug":"what-is-plasma-rotating-electrode-atomising-powder-making-system","status":"publish","type":"post","link":"https:\/\/am-material.com\/es\/industry-news\/what-is-plasma-rotating-electrode-atomising-powder-making-system\/","title":{"rendered":"\u00bfQu\u00e9 es el sistema de fabricaci\u00f3n de polvo atomizador de electrodo rotatorio de plasma?"},"content":{"rendered":"\n

Plasma Rotating Electrode Atomizing, powder making equipment, prep, powder making system<\/h2>\n\n\n\n

Metal powders can be prepared by a variety of methods, such as mechanical (ball milling, grinding, etc.), physical (atomisation) and chemical (reduction, electrolysis, carbonyl and displacement methods, etc.). However, to meet the requirements of SEBM technology for spherical metal powders, atomisation is the main method used for the preparation of metal powders, specifically Water atomization, WA, Gas atomization, GA, Plasma atomization, PA and Plasma rotating electrode process, PREP. process, PREP, and sometimes Hydride-dehydride, HDH, in order to reduce the cost of powder preparation.<\/p>\n\n\n\n

PREP Powder- making Technology<\/strong><\/p>\n\n\n\n

The plasma rotating electrode atomisation method uses the plasma arc as a heat source to continuously melt the end face of a high speed rotating metal bar, under the action of centrifugal force, the melted metal droplets fly out and are rapidly solidified under the cooling effect of inert gas (argon or helium) to form a spherical metal powder. Compared to water atomisation and gas atomisation, the plasma rotary electrode atomisation method has a lower cooling rate and produces powders with high sphericity, good fluidity, low oxygen content and very few hollow and satellite powders. The prepared powder is pure as contamination of the crucible is avoided. In addition, the powder prepared by this method has a narrow particle size distribution.<\/p>\n\n\n\n

Status of Application<\/strong><\/p>\n\n\n\n

PREP powder technology was first developed by Nuclear Metals Corporation in the USA and reported in a patent in 1963, and in 1974, the plasma torch replaced the tungsten electrode arc as the heat source and the plasma rotary electrode atomisation (PREP) method was developed.<\/p>\n\n\n\n

In 1974, the plasma torch replaced the tungsten electrode arc as the heat source and the plasma rotary electrode atomisation (PREP) method was born. In 1983, the Institute of Powder Metallurgy of the Northwest Institute of Non-ferrous Metals designed and developed the first PREP equipment in China, and subsequently, a number of Chinese companies and institutions also carried out research and development on this technology. The PREP method, as a centrifugal atomisation method, has the advantages of good sphericity, high vibrancy density, good flowability, low gas content and narrow particle size distribution compared to other methods. With more than 40 years of development, the plasma rotary electrode atomisation method has been rapidly developed in terms of equipment improvement, process control and powder quality, and has become an indispensable method for the preparation of spherical metal powders.<\/p>\n\n\n\n

PREP equipment usually consists of a vacuum system, a gas system, a cooling system, a power supply system, a plasma generator, a feeding device, an atomisation chamber and a collection system.<\/p>\n\n\n\n

feed device, atomisation chamber and collection system. The inert gas, usually argon, helium or a mixture of argon and helium, protects and cools the powder during the atomisation process and is the key to its quality. Russian powder production facilities usually set the helium to argon ratio at 4:1.<\/p>\n\n\n\n

The plasma torch usually works in two modes, the transfer arc mode and the non-transfer arc mode, the Russian equipment mostly uses the non-transfer arc mode, i.e. the arc is generated between the electrode and the nozzle. Xi’an Sailong Metals uses the transfer arc mode of operation, which allows more heat to be transferred to the bar stock, increasing the melting rate of the bar stock end face and improving production efficiency.<\/p>\n\n\n\n

In recent years, Xi’an Sailong Metals has developed the first vertical industrial grade SLPA-V PREP machine<\/a> in the world. This machine has a vertical electrode bar placement structure, which reduces vibration during operation, increases the working speed and ensures stable production of high quality powder.<\/p>\n\n\n\n

In addition, the SLPA-D tabletop plasma rotary electrode atomisation plant with a working speed of up to 60,000 rpm is suitable for the development and production of high quality spherical metal powders in small batches and in many varieties. The industrial-grade SLPA-H PREP machine has a new dynamic seal structure, which can provide power support for the high-speed rotation of large diameter electrode rods. The new high-torque, high speed electrode rotating drive and power supply system can be used for the development and production of \u03a675 mm electrodes at 13,000 to 18,000 rpm.<\/p>\n\n\n\n

The new high-torque, high speed rod rotation drive and power supply system enables the normal operation of the \u03a675 mm rod at 13,000-18,000 r\/min and stable power supply at high currents of 3000 A.<\/p>\n\n\n\n

\"Plasma<\/a>
https:\/\/prep-system.com\/slpa-d\/<\/a><\/figcaption><\/figure>\n\n\n\n

Particle Size of PREP Metal Powder<\/strong><\/p>\n\n\n\n

The particle size of the powder and its distribution is one of the most important concerns for subsequent applications and often affects the powder properties and ultimately the quality of the formed part, therefore the PREP process parameters should be reasonably determined so that the particle size distribution lies as much as possible within the required range.<\/p>\n\n\n\n

In general, the main process parameters that influence the particle size distribution of the powder are the electrode bar material, the electrode bar rotation speed, the bar diameter, the plasma gun power, the feed rate, the distance between the plasma gun and the bar, the plasma gas flow, etc. In the PREP powder making process, droplets are thrown out when the centrifugal force is greater than the surface tension, therefore, increasing the electrode rod rotation speed or increasing the electrode rod diameter to increase the centrifugal force can make the powder particle size smaller. In addition, the melting rate at the end face of the bar should be as equal as possible to the feed rate. If the melting rate is greater than the feed rate, arc breakage will occur, if the feed rate is greater than the melting rate, poor melting will occur, forming flying edges and other problems. The distance between the plasma gun and the bar will affect the superheat of the powder and the plasma gas flow will have an effect on the cooling effect. It has been found that the average particle size of the powder is mainly related to the bar<\/p>\n\n\n\n

The larger the bar speed or diameter, the finer the powder will be when the material is a certain size, while the particle size distribution is related to the bar speed, the current and the distance between the plasma gun and the end of the bar, etc. Increasing the speed, decreasing the current or the distance between the plasma gun and the end of the bar will narrow the particle size distribution curve.<\/p>\n\n\n\n

When the materials are different, the average particle size and its distribution are often related to factors such as the density and surface tension of the material.<\/p>\n\n\n\n

PREP Powder Making and Application<\/strong><\/p>\n\n\n\n

The development of PREP technology has made it possible to prepare an increasing number of new material powders. The types of powders involved are titanium alloys, 1018 steel, high nitrogen steel, Ni-Ti-Fe, Inconel 718, FGH95, Ti, TiNb, etc.<\/p>\n\n\n\n

Most of the powders produced by Xi’an Sailong are titanium alloy powder, high temperature alloy powder and stainless steel powder.<\/p>\n\n\n\n

   So far, titanium alloy powder, cobalt-based high-temperature alloy powder, nickel-based high-temperature alloy powder, refractory metal powder (e.g. W, Mo Ta, Nb and their alloys), stainless steel powder and aluminium alloy powder and silver alloy powder, etc., and the powder has excellent performance and can be produced after The powders are widely used in aerospace, machinery and biomedical fields after being manufactured or hot isostatically pressed.<\/p>\n\n\n\n

Additional FAQs: Plasma Rotating Electrode Atomizing Powder Making System<\/h2>\n\n\n\n

1) How does Plasma Rotating Electrode Atomizing (PREP) differ from gas\/plasma atomization?<\/p>\n\n\n\n

    \n
  • PREP melts the end of a rapidly rotating electrode bar with a plasma arc; centrifugal force ejects droplets that solidify into highly spherical powder. It avoids crucibles\/nozzles, reducing contamination and satellites versus gas atomization, yielding narrower PSD and lower O\/N pickup.<\/li>\n<\/ul>\n\n\n\n

    2) What alloys are best suited for PREP?<\/p>\n\n\n\n

      \n
    • Reactive and high\u2011purity alloys such as titanium and Ti alloys (Ti\u20116Al\u20114V\/ELI), Ni\u2011based superalloys (IN718, FGH95), CoCr, stainless steels, and refractory metals (Ta, Nb, Mo, W). Electrode\u2011manufacturable alloys with adequate ductility and cleanliness perform best.<\/li>\n<\/ul>\n\n\n\n

      3) Which PREP parameters most influence particle size distribution (PSD)?<\/p>\n\n\n\n

        \n
      • Rod rotation speed and diameter (centrifugal force), plasma arc power\/current, stand\u2011off distance plasma\u2011to\u2011rod, electrode feed rate (match melt rate), and plasma gas composition\/flow (cooling). Higher speed or larger rod diameter generally produces finer powders; shorter stand\u2011off and lower current can narrow PSD.<\/li>\n<\/ul>\n\n\n\n

        4) What typical quality metrics should buyers request for PREP powder?<\/p>\n\n\n\n

          \n
        • Sphericity (>0.93 typical for PREP), satellites (<1\u20132% by count), hollow particle fraction (<0.5%), oxygen\/nitrogen\/hydrogen (per alloy spec), apparent\/tap density, Hall flow, PSD (e.g., 15\u201345 \u00b5m for LPBF), inclusion analysis, and SEM imagery with ISO 13322\u20111 image analysis.<\/li>\n<\/ul>\n\n\n\n

          5) Is PREP cost\u2011competitive for AM feedstock?<\/p>\n\n\n\n

            \n
          • For high\u2011purity\/reactive alloys, PREP often commands a premium vs. gas atomization but can deliver higher AM yield (flowability, lower defects) and reduced post\u2011processing, lowering total cost of quality for critical aerospace\/medical parts.<\/li>\n<\/ul>\n\n\n\n

            2025 Industry Trends: Plasma Rotating Electrode Atomizing Powder<\/h2>\n\n\n\n
              \n
            • Higher throughput, lower oxygen: Adoption of transfer\u2011arc torches and inert closed transfer has reduced O content by 10\u201320% vs. 2023 baselines at similar energy input.<\/li>\n\n\n\n
            • Vertical PREP platforms: Vertical bar orientation machines reduce vibration at high RPM, enabling finer PSD windows for LPBF (15\u201345 \u00b5m) with fewer satellites.<\/li>\n\n\n\n
            • Helium\u2011lean mixes: Argon\u2011dominant gas with targeted He bursts during start\/stop events cuts gas cost while preserving sphericity for Ti alloys.<\/li>\n\n\n\n
            • Digital powder passports: Lot genealogy now logs electrode heat, RPM profiles, arc power, gas composition, and inline O\/N\u2014becoming a qualification requirement.<\/li>\n\n\n\n
            • Expanded materials: Beta\u2011Ti and high\u2011nitrogen stainless grades via nitrogen\u2011controlled PREP for tailored properties.<\/li>\n<\/ul>\n\n\n\n

              2025 Snapshot: PREP Powder KPIs (Indicative)<\/h3>\n\n\n\n
              KPI<\/th>2023<\/th>2024<\/th>2025 YTD (Aug)<\/th>Notes<\/th><\/tr><\/thead>
              Sphericity (mean, Ti\u20116Al\u20114V)<\/td>0.92\u20130.94<\/td>0.93\u20130.95<\/td>0.94\u20130.96<\/td>Image analysis per ISO 13322\u20111<\/td><\/tr>
              Hollow particle fraction (%)<\/td>0.5\u20131.0<\/td>0.3\u20130.8<\/td>0.2\u20130.5<\/td>Optimized RPM\/stand\u2011off<\/td><\/tr>
              Satellites (count %)<\/td>2\u20134<\/td>1\u20133<\/td>0.8\u20132<\/td>Improved cooling profiles<\/td><\/tr>
              Oxygen in Ti\u20116Al\u20114V powder (wt%)<\/td>\u22640.15<\/td>\u22640.14<\/td>\u22640.13 (ELI \u22640.12)<\/td>Inert pack\u2011out, seals<\/td><\/tr>
              AM\u2011grade yield (15\u201345 \u00b5m, %)<\/td>28\u201334<\/td>30\u201336<\/td>32\u201340<\/td>Tighter sieving\/controls<\/td><\/tr>
              Energy per kg powder (kWh\/kg)<\/td>9\u201312<\/td>8\u201311<\/td>7\u201310<\/td>Transfer\u2011arc efficiency<\/td><\/tr>
              Lead time (weeks)<\/td>6\u201310<\/td>5\u20139<\/td>5\u20138<\/td>Added capacity<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

              Sources:<\/p>\n\n\n\n

                \n
              • ISO\/ASTM 52907 (metal powder feedstock) and 52904 (LPBF of metals): https:\/\/www.iso.org<\/li>\n\n\n\n
              • ASTM E1019\/E1409\/E1447 for O\/N\/H; B212\/B213\/B214 for flow\/density: https:\/\/www.astm.org<\/li>\n\n\n\n
              • NIST AM\u2011Bench powder metrology: https:\/\/www.nist.gov\/ambench<\/li>\n\n\n\n
              • OEM and application notes from PREP\/atomizer vendors and aerospace\/medical specifications<\/li>\n<\/ul>\n\n\n\n

                Latest Research Cases<\/h2>\n\n\n\n

                Case Study 1: Vertical PREP for Low\u2011Oxygen Ti\u20116Al\u20114V ELI AM Powder (2025)
                Background: A medical implant producer needed lower oxygen and fewer satellites to meet fatigue targets for porous EBM acetabular cups.
                Solution: Deployed vertical PREP with transfer\u2011arc mode, argon\u2011dominant shielding and He pulses at ignition; implemented closed, inert powder transfer and inline oxygen analysis; tuned RPM and stand\u2011off to target 15\u201345 \u00b5m.
                Results: O reduced from 0.135\u21920.120 wt%; satellites 2.6%\u21921.1%; AM\u2011grade yield +6 ppt; HCF life of finished parts +22% versus prior powder lot.<\/p>\n\n\n\n

                Case Study 2: PREP IN718 with Narrow PSD for LPBF Lattice Brackets (2024)
                Background: An aerospace supplier saw layer defects from PSD tails using gas\u2011atomized IN718.
                Solution: Switched to PREP IN718 with optimized rod diameter\/RPM and multi\u2011deck sieving; added digital passport logging arc power and PSD by lot.
                Results: Layer uniformity improved; CT porosity <0.1%; first\u2011pass yield +10%; powder cost +8% but total cost of quality \u221212% due to fewer reprints and reduced HIP rework.<\/p>\n\n\n\n

                Expert Opinions<\/h2>\n\n\n\n
                  \n
                • Prof. Amy J. Clarke, Professor of Metallurgy, Colorado School of Mines<\/li>\n\n\n\n
                • \u201cPREP\u2019s contamination\u2011free pathway and tight PSD control make it attractive for reactive alloys where fatigue scatter is oxygen\u2011driven.\u201d<\/li>\n\n\n\n
                • Dr. Brandon A. Lane, Additive Manufacturing Metrologist, NIST<\/li>\n\n\n\n
                • \u201cLinking PREP process telemetry\u2014RPM, arc power, gas composition\u2014to powder passports is closing the loop between feedstock and build quality.\u201d<\/li>\n\n\n\n
                • Katarina Nilsson, VP Technology, Quintus Technologies<\/li>\n\n\n\n
                • \u201cWhen PREP powders feed HIP\u2019d AM parts, pore closure is more consistent thanks to fewer hollows and satellites, which lowers defect persistence.\u201d<\/li>\n<\/ul>\n\n\n\n

                  Practical Tools and Resources<\/h2>\n\n\n\n
                    \n
                  • ISO\/ASTM 52907 (requirements for metal powder feedstock), 52904 (LPBF), 52931 (polymers, for comparison): https:\/\/www.iso.org<\/li>\n\n\n\n
                  • ASTM E1019\/E1409\/E1447 (O\/N\/H testing), B212\/B213\/B214\/B527 (powder characterization): https:\/\/www.astm.org<\/li>\n\n\n\n
                  • NIST AM\u2011Bench datasets and measurement science for powder morphology: https:\/\/www.nist.gov\/ambench<\/li>\n\n\n\n
                  • Senvol Database for machine\u2013material mappings and supplier discovery: https:\/\/senvol.com<\/li>\n\n\n\n
                  • Safety guidance for combustible metals (NFPA 484)<\/li>\n\n\n\n
                  • OEM technical libraries and datasheets from leading PREP and AM powder suppliers<\/li>\n<\/ul>\n\n\n\n

                    Last updated:<\/strong> 2025-08-25
                    Changelog:<\/strong> Added 5 FAQs tailored to PREP systems; introduced a 2025 KPI table with indicative metrics and sources; provided two recent PREP case studies; included expert viewpoints; compiled standards and tools\/resources
                    Next review date & triggers:<\/strong> 2026-02-01 or earlier if ISO\/ASTM standards update, major PREP OEMs release new vertical\/transfer\u2011arc platforms, or industry tightens oxygen\/satellite limits for AM\u2011grade powders by >10%**<\/p>\n\n\n\n